cdorsm62ky1htrwamqtl

New segregated cycling routes are of course to be welcomed however, to encourage more people to use them, it is essential for them to connect up with other cycle routes around the city, forming a fully integrated network. It is widely recognised that this is not the case at present and, while the council has plans to scale up the network, there is a role for Cardiff Cycle City to play in facilitating a discussion and gathering people’s views on where improvements are needed based upon their experiences of cycling around the city. The ‘cycle network gaps’ campaign aims to do exactly this so we can better support Cardiff City Council to target investment where it’s needed most urgently to improve people’s safety when cycling around the city.

In support of this campaign, we are in the process of preparing an interactive map to be shown on our website. This will show Cardiff’s existing cycle network and highlight where local residents have reported safety concerns and where cycling infrastructure could be improved. It is hoped that by creating a visual tool in this way we will be better able to engage the wider community and local decision-makers on this important issue.

Whilst we’re working on the new feature for our website, we wanted to let you know about the gap issues we are currently working on.  After first raising the topic with the council we asked you to email us about your pet hates and we organised a ‘drop-in’ session at the Bike Lock to let you spell out the problems to council officials. Listed below are the problems you highlighted. We’ve also noted what the council has told us about their plans to fix the problems. It’s important to note that we’re only dealing here with small gaps in the existing network, not brand new routes – that’s a separate process.

If you think there are issues missing from the list, or you’ve spotted a change – positive or negative – drop us an email at info@cardiffcyclecity.org

The featured image is taken from Welsh Government’s Active Travel Network Map.

North Road/Boulevard de Nantes

Issue: The pop-up infrastructure and traffic signals are all designed for cyclists travelling north along North Road to turn right into Boulevard de Nantes.  For the many cyclists who want to continue along North Road, there is no safe cycle route, they are forced to share the dual carriageway with often heavy traffic for at least 100 metres until they reach an inadequate path through the car park.  Since the cycle lane traffic lights also only cater for a right turn, cyclists heading straight on can’t legally proceed when the main traffic lights are on green, causing unnecessary delay for no improvement in safety.  We urgently need a safe route from the lights to join the reasonable quality shared use path just south of the RWCMD.

What the Council says:

  • The current proposal now places the cycleway on the northern side of Boulevard De Nantes.
  • As part of the current proposal, a connection link will be provided on the north-east corner of the junction that provides an opportunity to connect to the existing shared surface on the eastern side of North Road linking to the existing toucan crossing by the Music College. A scheme is being developed to improve the route on the eastern side of North Road that will link from Boulevard De Nantes to Corbett Road and on to Cathays Terrace.
  • At the junction, the lining will be adjusted and footway widened to allow cyclists to head northbound and access a shared space that will connect with the access to Bute Park and likewise for cyclists to join the cycleway southbound. Further work is needed to explore the continuation of a route northbound towards the car park area due to the coach parking bay, car park space and potential 3rd party land.

Progress:  The council’s latest plans involve moving the cycle lane from the southern side of Boulevard de Nantes to the northern side, which should make it possible to provide a link to the shared use path on the eastern side of North Road.  We’ll keep you updated as we get more information on timings.

Diagonal cycle crossing near UHW, positioning of buttons/lights

Issue: The junction at the Allensbank Road entrance to UHW requires cyclists using Cycleway 1 to share a crossing with pedestrians, even though the waiting space is very confined (because of the cemetery wall).  There is also a problem with the siting of the button and display, which makes it very difficult for cyclists to position themselves at the crossing and be able to see when the signal is on green.  Pedestrians have also complained about this issue.  A solution would be to have a diagonal crossing for cyclists at the junction that would avoid the most constrained space.

What the Council say:

  • Comments noted and have been forwarded onto the Project Officer.

Progress:

Wood St/Tudor St

Issue: There is no safe route from the Taff Trail along Wood Street to Cardiff Central Station.  Cyclists travelling from the station wishing to turn right onto the Taff Trail are not catered for by the traffic lights (since Fitzhamon Embankment is no entry, although two way).  The new cycle lane on Tudor Street does not connect to the Taff Trail, but just stops abruptly some 15 metres short.  On Sundays, the Riverside Market entirely blocks the Fitzhamon Embankment shared use path but it is difficult for cyclists to use the roadway as there is no dropped kerb to access it and the carriageway is seriously obstructed by double parking and several bus stops.  The area needs a major redesign.

What the Council say:

  • An active travel bridge is being developed from Taff Mead Embankment into the new development site to the south of the station.
  • Comments noted and have been forwarded onto the Project Officer for the Wood St project and the Active Travel team.

Progress:  Some painted white lines have been used to notionally extend the Tudor Street Cycle Lane to the Fitzhamon entrance.

Windsor Place/A4161 (Newport Road)

Issue: Cyclists using the pelican crossing to cross Newport Road from St Andrews Crescent, heading to Queen Street find themselves in the middle of oncoming traffic on Windsor Place.  It is also not clear how cyclists heading from Windsor Place are meant to join the cycleway on Newport Road.

What the Council say:

  • This will be considered as part of the scheme currently being progressed and detailed design.

Progress:

Richmond Road

Issue: Important route through Roath, listed on the Active Travel Network Map, but concerns that the route may not be developed.

What the Council says: The route will be developed but there is no definite date yet.

Progress:

  • A concept design has been developed and we are currently reviewing certain elements as they have network management implications. We hope to start the engagement process soon.

St Andrews Crescent

Issue: This is an important part of Cycleway 1, yet cyclists have to use the carriageway which is flanked by diagonally parked cars who often emerge abruptly.

What the Council says:

  • Comments noted and have been forwarded onto the Project Officer.

Progress:

Cycle lane traffic lights on Cathays Terrace/Charlotte Street Junction

The phasing of the cycle lane traffic lights at this junction causes serious delays and is resulting in many cyclists either using the pedestrian phase or joining the main carriageway and mixing with motorised traffic.  The situation is exacerbated by the need for cyclists to push a button at the lights, rather than being detected by a sensor, as is the case on Newport Road.  There is a similar problem on Cycleway 1 at the junction of Allensbank Road and Wedal Road.  Pushing a button significantly delays cyclists and is a particular problem in cold and inclement weather when it may require the removal of gloves.  All cycle lane traffic lights should be operated by sensors.

What the Council says:

  • The use of push buttons on cycleways is a secondary feature and should not cause any additional delay as cyclists are automatically detected using sensors. The pushbutton will also automatically be illuminated after a short period to show a demand has been called and cyclists also can physically push the button. Pushing the button ‘latches’ the call demand, whereas if a cyclist failed to push the button and failed to wait, the call will be cancelled to avoid unnecessary delay to the junction. Push buttons are also beneficial if a sensor fails to detect a cyclist or fails.

    C=CC Note: since the council told us this, we’ve tried most of the cycle lane traffic lights and they do all seem to work even if you don’t press the button.  The one exception is on Cycleway 1 at the junction with Wedal Road when cycling north on the cycle lane along Allensbank Road.  We think this is due to a misaligned sensor.

2 thoughts on “Cardiff Cycling Network Gaps”

  1. I think it’s great what you are doing.CCC now has such a presence – I keep seeing Facebook postings – really encouraging.
    Loved the first edition of the newsletter too. Am an ardent but kind of aging cyclist – now mainly commuting – so the network and safety issues even more significant. I look forward to the next meeting at BikeLock. Used to be a committee member .. not sure how, if I can still make some sort of contribution but I’ll
    Keep an open mind. I volunteer and am a Trustee at Pedal Power so if that link is useful at all am happy to discuss.
    SJ

  2. I did not know that there were cycle sensors at lights. My experience (for example at the junction of city rd/Newport Rd going out of town) and other places, is that other junctions get green lights *twice*while I am waiting on a bike . I would be interested if this is because the timing depriorities cyclists or if I am not in the right place for the sensor. If it is the latter, then perhaps you could provide some education on how the sensors work and how to position oneself to be detected.

Comments are closed.